Disposable Mixer

The GXP-H disposable mixer is based on the established X-Grid mixing geometry and is available with 8, 12 or 16 mixing elements. The mixing elements can also be installed inside of metal pipes with an inside diameter of 12mm. This X-grid mixer type is ideally suited for difficult-to-mix resin / hardener systems, e.g. 2K adhesives, epoxy, polyurethanes, silicones, resins or varnishes, as well as for media with larger viscosity and density ratios. The dispersing effect of insoluble medias is significantly higher.

The Stamixco patented GXF-21 plastic disposable static mixer is available in a large diameter of 21mm in a plastic housing with 9, 12 or 15 mixing elements. These large diameter units can be connected with standard bell connections, flanges, 3/4" pipe thread at the inlet.

The GXP plastic disposable static mixer is available in a 9.4mm diameter in 50% glass filled Nylon PA66 and Polypropylene construction. The GXP is used for difficult meter-mix-dispense applications. Standard plastic housings are available with 20 mixing elements. Also available are special high pressure plastic housings that hold 6 mixing elements with a maximum operating pressure of 100 bar. These plastic housings can be connected in series via ring fittings M18 x 1.5mm.

The Stamixco patented GXR-P plastic static mixing elements have support rings around the mixing element structure and are available in a 29.7mm outside diameter and 21mm inside diameter in 50% glass filled Nylon PA66 material. They are used for high pressure and temperature applications and are normally installed inside of high pressure metal tubing. As with all High Performance X-Grid static mixers, they are used for processing difficult mixing applications where the materials to be mixed have large differences in volumetric and viscosity ratios as in many liquid silicone rubber (LSR) applications.